Click image to view full size image
NM-EJW2A Calibration jig of CM402 feeder
NM-EJW2A adjust jig, it is for CM602,CM402,NPM feeders.
Specifications:
| NM-EJW2A | Application | CM402,CM602,NPM Feeder |
| First part code | NM-EJW2A | |
| Demensions | 400*500*1100mm | |
| Electric Source | 100-240V`50/60Hz | |
| Scope of the applicable | 8mm-32mm | |
| Adjusted accuracy | ≤0.02mm | |
| Corrected accuracy | ≤0.05mm | |
| Jig tape set | 1set(8mm,12mm,16mm,24mm,32mm,master jig) |
Description:
1. Adopt hardened metal, new spare parts, they are used for CM402/602/212/NPM feeders, part code is :NM-EJW2A.
2. The intelligent feeder check unit allows the customer to perform maintenance on the intelligent feeders(tape feeders 8mm to 32mm wide)
2-1. A periodic check can be made after a fixed number of operations.
2.2. The customer can adjust the component-feeding position after replacing the parts of a malfunctioning feeder(limited to components).
2-3. The feeder maintenance history will be managed on a PC.
3. Features:
The camera-captured image will be displayed on the PC screen, not on the dedicated screen any longer, therefore, the reference position of feed direction can be visually adjusted through the use of PC.
Also the target reference frame to be used for adjustment can be selected from a pull-down list on th
Original NM-EJW2A Calibration jig of CM602 / CM402 / NPM feeders
